Figure 34. PCIe adapter installation
Table 22. PCIe adapter installation
1 Adapter retainer
After you install the PCIe adapter, complete the following steps:
1. Install the PCIe riser assembly (see
“Install the PCIe riser assembly” on page 106 for instructions).
2. Install the node if needed (see
“Install a node” on page 101).
3. Reconnect power cords and all external cables.
Air baffle replacement
Use the following information to remove and install the air baffle.
Remove the air baffle
Use this information to remove the air baffle.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
Hot surface nearby.
Before you remove the air baffle, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
“Safety” on page iii
• “Installation Guidelines” on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see “Power off the server” on
page 16
).
3. Remove the node from the enclosure if needed (see “Remove a node” on page 98).
50
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
To Next Page
Loading...
