System fan replacement
Use this information to remove and install a system fan.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S009
CAUTION:
To avoid personal injury, disconnect the fan cables before removing the fan from the device.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Remove a system fan
Use this information to remove a system fan.
“Read the
installation
Guidelines” on
page 45
“Power off
the server
for this task”
on page 14
“ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 48
Before removing a system fan:
1. Remove the top cover. See “Remove the top cover” on page 57.
2. Remove the air baffle. See “Remove the air baffle” on page 60.
To remove a system fan, complete the following steps:
Watch the procedure. A video of the removal process is available:
Chapter 3. Hardware replacement procedures 67
To Next Page
Loading...
