Step 2. Remove the M.2 drive from the M.2 adapter.
Note: The M.2 adapter you want to remove might be different from the following illustrations, but
the removal method is the same.
Figure 89. M.2 drive removal
a. Press both sides of the retainer 2 .
b. Slide the retainer backward to loosen the M.2 drive from the M.2 adapter.
c. Rotate the M.2 drive away from the M.2 adapter.
d. Pull the M.2 drive away from the connector
1 at an angle of approximately 30 degrees.
Chapter 4. Hardware replacement procedures 167
To Next Page
Loading...
