Table 12. Components on the rear of the server (continued)
Callout Callout
5 NMI button
6 VGA connector
7 USB 3.1 Gen 1 (5Gbps) connectors (3 DCIs) 8 XClarity Controller network connector
9 Ethernet connectors of the OCP module on the rear
(optional, two or four connectors may be available)
Figure 4. Rear view with 2 low profile PCIe adapters
Table 13. Components on the rear of the server
Callout Callout
1 PCIe slot 1 on riser 1 assembly 2 PCIe slot 3 on riser 2 assembly
3 Power supply 2 (optional)
4 Power supply 1
5 NMI button
6 VGA connector
7 USB 3.1 Gen 1 (5Gbps) connectors (3 DCIs) 8 XClarity Controller network connector
9 Ethernet connectors of the OCP module on the rear
(optional, two or four connectors may be available)
Figure 5. Rear view with 1 low profile PCIe adapter, 1 filler, and 1 full height PCIe adapter
Table 14. Components on the rear of the server
Callout Callout
1 PCIe slot 1 on riser 1 assembly 2 PCIe slot 3 on riser 2 assembly
3 Power supply 2 (optional)
4 Power supply 1
5 NMI button
6 VGA connector
7 USB 3.1 Gen 1 (5Gbps) connectors (3 DCIs) 8 XClarity Controller network connector
9 Ethernet connectors of the OCP module on the rear
(optional, two or four connectors may be available)
Note: For more information about each component, see
“Rear components overview” on page 27.
Chapter 2. Server components 25
To Next Page
Loading...
