Lenovo ThinkSystem SR635 V3 - Page 192

Step 2. Install the riser card and secure it to the bracket.
Figure 129. Riser card installation
1.
Align the screw holes in the riser card with the corresponding ones in the bracket.
2.
Install the two screws to secure the riser card to the bracket.
Step 3. If necessary, reinstall the PCIe adapters on the riser card. See
“Install a PCIe adapter” on page 142.
Then, refer to your note to reconnect any cables of the PCIe adapters on the riser card. Or you can
refer to the
Chapter 6 “Internal cable routing” on page 217 and locate the cable routing information
for your configuration options.
182
ThinkSystem SR635 V3 User Guide