Step 2. Install the top cover to your server.
Attention: Handle the top cover carefully. Dropping the top cover with the cover latch open might
damage the cover latch.
Figure 127. Top cover installation
a. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until
both sides of the top cover engage the guides on both sides of the chassis. Then, slide the top
cover to the front of the chassis.
Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage
the chassis correctly.
b. Press down the cover latch and ensure that the cover latch is completely closed.
c. Use a screwdriver to turn the cover lock to the locked position.
After you finish
After installing the top cover, complete the parts replacement. See Complete the parts replacement.
240
ThinkSystem SR645 Maintenance Manual
To Next Page
Loading...
