Server model with three PCIe slots
The following illustration shows the rear view of server model with three PCIe slots. Depending on the model,
your server might look slightly different from the illustration below.
Table 12. Components on the rear of the server
Callout Callout
1 PCIe slot 1 on riser 1 assembly 2 PCIe slot 2 on riser 1 assembly
3 PCIe slot 3 on riser 2 assembly 4 Power supply 2 (optional)
5 Power supply 1 6 NMI button
7 USB 3.1 Gen 1 connectors (3) 8 VGA connector
9 XClarity Controller network connector 10 Ethernet connectors on OCP 3.0 Ethernet adapter
(optional)
Note: For more information about each component, see Rear components overview.
Chapter 2. Server components 35
To Next Page
Loading...
