Server model with two 7mm hot-swap rear drive bays and two PCIe slots
The following illustration shows the rear view of the server model with two 7mm hot-swap rear drive bays and
two PCIe slots. Depending on the model, your server might look slightly different from the illustration below.
Table 15. Components on the rear of the server
1 PCIe slot 1 on riser 1 assembly 2 PCIe slot 2 on riser 1 assembly
3 Rear 7mm drive bays (2) 4 Power supply 2 (optional)
5 Power supply 1 6 NMI button
7 USB 3.1 Gen 1 connectors (3) 8 VGA connector
9 XClarity Controller network connector 10 Ethernet connectors on OCP 3.0 Ethernet adapter
(optional, two or four connectors may be available)
Note: For more information about each component, see Rear components overview.
38
ThinkSystem SR645 Maintenance Manual
To Next Page
Loading...
