Server model with four 3.5-inch drive bays (backplane-less)
Table 10. Components on the front of the server
Callout Callout
1 Rack latch (right) 2 VGA connector (optional)
3 External diagnostics connector
4 XClarity Controller USB connector and USB 3.1 Gen 1
connector
5 Diagnostics panel
6 Rack latch (left)
7 Pull-out information tab
8 Drive bay fillers (4)
9 Drive status LED 10 Drive activity LED
Note: For more information about each component, see “Front components overview” on page 25.
Chapter 2. Server components 23
To Next Page
Loading...
