Server model: eight 3.5-inch SAS/SATA drives, the rear hot-swap drive assembly, one 16i RAID
adapter
Figure 66. Cable routing for server models with eight 3.5-inch SAS/SATA drives, the rear hot-swap drive assembly, and
one 16i RAID adapter
Cable
From To
1 Power cable Power connector on the backplane Backplane power connector 1 on the
system board
2 SAS signal cable SAS 0 and SAS 1 connectors on the
backplane
C0 and C1 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
3 SAS signal cable for the rear hot-
swap drive assembly
Signal connector on the rear hot-
swap drive assembly
C2 connector on the 16i RAID
adapter installed on the RAID adapter
slot
114 ThinkSystem SR650 Setup Guide
To Next Page
Loading...
