Server model: eight 3.5-inch SAS/SATA drives, four 3.5-inch NVMe drives, one 8i RAID adapter
Figure 70. Cable routing for server models with eight 3.5-inch SAS/SATA drives, four 3.5-inch NVMe drives, and one 8i
RAID adapter
Cable From To
1 Power cable Power 1 connector on the backplane Backplane power connector 1 on the
system board
2 SAS signal cable SAS 0 and SAS 1 connectors on the
backplane
C0 and C1 connectors on the 8i RAID
adapter installed on the RAID adapter
slot
3 Power cable Power 2 connector on the backplane Backplane power connector 2 on the
system board
4 NVMe signal cable NVMe 0, NVMe 1, NVMe 2, and
NVMe 3 connectors on the backplane
NVMe 0–1 and NVMe 2–3 connectors
on the system board
120 ThinkSystem SR650 Setup Guide
To Next Page
Loading...
