Information only; no action is required.
• FQXSPSE4050I: [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].
This message is for the use case where IPMI command to be sent.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0251
User Action:
Information only; no action is required.
• FQXSPSE4057I: User [arg1] created by user [arg2] from [arg3] at IP address [arg4].
A user account was created by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0254
User Action:
Information only; no action is required.
• FQXSPSE4058I: User [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
A user account was deleted by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0255
User Action:
Information only; no action is required.
• FQXSPSE4059I: User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4].
A user account was changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0256
User Action:
Information only; no action is required.
• FQXSPSE4060I: User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Chapter 2. XClarity Controller events 117
To Next Page
Loading...
