• http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html
• “Installation Guidelines” on page 55
• “Handling static-sensitive devices” on page 58
• “Power off the server” on page 73
2. Any system-board switch or jumper block that is not shown in the illustrations in this document are
reserved.
Figure 14. System-board-assembly switch blocks
1 SW2 2 SW6
SW2 switch block
Table 20. SW2 switch block
Switch block Switch
number
Switch name Default
position
Description
SW2-1 FPGA reset OFF Forces FPGA into reset when changing it to
the ON position.
SW2-2 Force BMC CPU
reset
OFF Forces BMC and CPU into reset when
changing it to the ON position.
Chapter 2. Server components 37
To Next Page
Loading...
