Lenovo ThinkSystem SR665 V3 - Page 251

Step 3. Install the new PCIe adapter to the riser assembly.
• Riser 1/2/3/5 assembly
Figure 214. Installing the PCIe adapter to the riser 1 or 2 assembly
Figure 215. Installing the PCIe adapter to the riser 3 assembly
a. Press the retainer clip downward.
b.
Rotate the retention latch to the open position.
c.
Align the PCIe adapter with the PCIe slot on the riser card. Carefully press the PCIe adapter
straight into the slot until it is securely seated and its bracket also is secured.
d.
Close the retention latch.
• 4LP riser 3/4 assembly
Figure 216. Installing the PCIe adapter to the 4LP riser 3/4 assembly
Chapter 5. Hardware replacement procedures 241