Step 3. Install the super capacitor module.
Figure 102. Super capacitor module installation
1. Insert the RAID super capacitor module into the retaining clip at one side as shown.
2. Press the RAID super capacitor module down on the other side until it snaps into place.
Step 4. Connect the super capacitor module to an adapter with the extension cable that comes with the
super capacitor module. See “RAID super capacitor modules” on page 66.
Install a super capacitor module on the air baffle
Use this information to install a super capacitor module on the air baffle.
About this task
Attention:
• Read “Installation Guidelines” on page 134 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku: http://list.youku.com/albumlist/show/id_52339612.html
Procedure
Chapter 4. Server hardware setup 219
To Next Page
Loading...
