ThinkSystem SR665 Rear 2 x 7mm NVMe RAID enablement kit
This topic provides important information about ThinkSystem SR665 Rear 2 x 7mm NVMe RAID enablement
kit. The option package contains the following items.
1 7mm SATA/NVMe rear backplane bottom board (1)
2 7mm NVMe 2-bay rear backplane upper board (1)
3 7mm tray filler (2)
4 2FH + 7mm SSD riser cage (1)
5 7mm drive cage retention bracket for riser cage (1)
6 2 * 7mm SSD cage, installed in 2U riser cage (1)
7 7mm SSD riser2 cage (used under rear drive cages) (1)
8 M3 screw to attach 7mm cage to riser cage rear wall (2)
9 M3.5" screws (8)
10 Power cable (1)
11 Signal cable (1)
Note:
The illustration in this topic might differ slightly from your hardware.
For information about installing the option product, refer to the Server hardware setup or Internal cable
routing chapter in the Setup Guide, or go to:
https://thinksystem.lenovofiles.com/help/topic/7D2W/server_setup.html or
https://thinksystem.lenovofiles.com/help/topic/7D2W/internal_cable_routing.html.
To get the latest technical information and download device drivers and updates, go to:
34
ThinkSystem SR665 System Option Manual
To Next Page
Loading...
