Table 3. Events organized by severity (continued)
Event ID
Message String Severity
FQXSFMA0026I DIMM [arg1] Self-healing, attempt post package repair (PPR)
succeeded. [arg2]
Informational
FQXSFMA0027I Invalid memory configuration (unsupported DIMM Population)
recovered.
Informational
FQXSFMA0029I The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
Informational
FQXSFMA0030I A correctable memory error has been detected on DIMM [arg1]. [arg2] Informational
FQXSFMA0056I Uncorrected memory error occurred on DIMM [arg1] has been
deasserted after performing post package repair. DIMM identifier is
[arg2].
Informational
FQXSFMA0065I Multi-bit CE of DIMM [arg1] has been deasserted after performing
post package repair. DIMM identifier is [arg2].
Informational
FQXSFMA0067I Errors per row counter threshold limit exceeded on DIMM [arg1] has
been deasserted after performing post package repair. DIMM
identifier is [arg2].
Informational
FQXSFPU0021I
The TPM physical presence state has been cleared. Informational
FQXSFPU0023I Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
Informational
FQXSFPU0025I The default system settings have been restored. Informational
FQXSFPU0038I A correctable error (Type [arg1]) has been detected by processor
[arg2].
Informational
FQXSFPU4034I TPM Firmware recovery is finished, rebooting system to take effect. Informational
FQXSFPU4038I TPM Firmware recovery successful. Informational
FQXSFPU4041I TPM Firmware update is in progress. Please DO NOT power off or
reset system.
Informational
FQXSFPU4042I TPM Firmware update is finished, rebooting system to take effect. Informational
FQXSFPU4044I The current TPM firmware version could not support TPM version
toggling.
Informational
FQXSFPU4046I TPM Firmware will be updated from TPM1.2 to TPM2.0. Informational
FQXSFPU4047I TPM Firmware will be updated from TPM2.0 to TPM1.2. Informational
FQXSFPU4049I TPM Firmware update successful. Informational
FQXSFPU4059I User requested to skip freezing lock of AHCI-attached SATA drives.
System UEFI accepted the request and will execute prior to OS boot.
Informational
FQXSFPU4060I Skipped freezing lock of AHCI-attached SATA drives. Informational
FQXSFPU4061I Restored default locking behavior of AHCI-attached SATA drives. Informational
FQXSFPU4070I Platform secure boot fuse is enabled. Informational
FQXSFPU4071I Platform secure boot fuse is disabled. Informational
FQXSFPU4080I Host Power-On password has been changed. Informational
FQXSFPU4081I Host Power-On password has been cleared. Informational
162 ThinkSystem SR685a V3 Messages and Codes Reference