Information only; no action is required.
• FQXSPEM4041I: The SmartNIC in slot [arg1] encountered boot timeout.
SmartNIC in a certain slot encountered boot timeout
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0312
User Action:
Information only; no action is required.
• FQXSPEM4042I: The SmartNIC in slot [arg1] went through a crash dump.
SmartNIC in a certain slot went through a crash dump
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0313
User Action:
Information only; no action is required.
• FQXSPEM4043I: A [arg1] failure has been detected and need [arg2] to recover.
backplane failure has detected
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: IMM CIM ID: 0320
User Action:
Information only; no action is required.
• FQXSPEM4044I: Dust filter measurement was successfully completed, no action is needed.
Alert the user when dust filter measurement is completed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0321
User Action:
Information only; no action is required.
• FQXSPFC4000I: The bare metal connection process has been started.
Chapter 2. XClarity Controller events 53
To Next Page
Loading...
