Service Action:
Complete the following steps until the problem is solved:
1. Review PD Steps.
2. Check the chassis is either opened or is not properly sealed.
3. If problem persists, escalate to next level of support.
• FQXSPSE2000I: The Chassis [PhysicalPackageElementName] was closed.
This message is for the use case when a Chassis has been closed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0005
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSPSE4000I: Certificate Authority [arg1] has detected a [arg2] Certificate Error.
This message is for the use case when there is an error with an SSL Server, SSL Client, or SSL Trusted CA
Certificate.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0002
User Action:
Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct and properly generated.
2. If problem persists, collect Service Data log.
3. Contact Lenovo Support.
Service Action:
Complete the following steps until the problem is solved:
1. Review PD Steps.
2. Check Lenovo support site for an applicable service bulletin or firmware update for the system or adapter that
applies to this error.
3. If problem persists, escalate to next level of support.
• FQXSPSE4001I: Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address
[arg4].
146
ThinkSystem SR850 V2 System Events Service Guide