Lenovo ThinkSystem SR850 V2 - Page 250

Service Action:
1. Review PD Steps.
2. Download the update package for LXPM, UEFI, XCC and apply it using (onecli or XCC WEB).
3. Install OS manually.
4. If problem persists, escalate to next level of support
• FQXPMCL0004K: BMC communication succeeded. Volume Name MISMATCHED.
Severity: Warning
User Action:
1. Restart BMC via supported method and reboot the system.
2. Reflash BMC firmware.
3. Clone the image over and retry the operation.
4. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
5. If the problem persists, please contact technical support.
Service Action:
1. Review PD Steps.
2. Download the update package for LXPM, UEFI, XCC and apply it using (onecli or XCC WEB).
3. Install OS using manual method.
4. If problem persists, escalate to next level of support
• FQXPMCL0005I: Start to install OS.
Severity: Info
User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMCL0005K: Current System Boot Mode is Legacy. OS Clone only support UEFI Mode.
Severity: Warning
User Action:
1. Change Boot mode to UEFI mode (UEFI Setup -> Boot Manager -> Boot Modes -> System Boot
Mode and select UEFI Mode.)
2. Clone the image over and retry the operation.
Service Action:
n/a
246 ThinkSystem SR850 V2 System Events Service Guide