Figure 82. Removing USB 3.0 connector vertically
To remove the PCIe riser-card assembly, complete the following steps:
Step 1. Disconnect any cables connected to the adapter(s).
Step 2. Grasp the PCIe riser-card assembly at the touch-points, and lift it out from the system board.
Figure 83. PCIe riser-card assembly removal
Step 3. Remove the screws that fix the PCIe riser-card, and slightly push it away to detach it from the riser-
cage.
Chapter 3. Hardware replacement procedures 87
To Next Page
Loading...
