a. Align the bottom of the PCIe riser-card to the slot, and rotate the top to fit it into the slot on the
riser-cage; then, move the PCIe riser-card slightly to fit the holes into the pins.
Figure 86. PCIe riser-card assembly
b. Install the PCIe riser-card to the riser-cage with screws.
Figure 87. PCIe riser-card assembly
Step 2. Align the PCIe riser-card assembly with the connector on the system board; then, push it in until it
clicks in place.
Chapter 3. Hardware replacement procedures 89
To Next Page
Loading...
