Lenovo ThinkSystem SR860 - Page 148

Note: If the text-based interface of Setup Utility opens instead of Lenovo XClarity Provisioning Manager,
go to System Settings ➙ <F1> Start Control and select Tool Suite. Then, reboot the system and press
the key specified in the on-screen instructions as soon as the logo screen appears to open Lenovo
XClarity Provisioning Manager.
**
• Setup Utility
To enter Setup Utility:
1. Power on the system and press the key specified in the on-screen instructions to open LXPM.
**
2. Go to UEFI Settings ➙ System Settings, click on the pull-down menu on the upper right corner of
the screen, and select Text Setup.
3. Reboot the system, and press the key specified in the on-screen instructions as soon as the logo
screen appears.
**
Go to System Configuration and Boot Management ➙ System Settings ➙ Intel Optane PMems to
configure and manage PMems.
• Lenovo XClarity Essentials OneCLI
Some management options are available in commands that are executed in the path of Lenovo XClarity
Essentials OneCLI in the operating system. See
https://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_
lenovo/onecli_t_download_use_tcscli.html
to learn how to download and use Lenovo XClarity Essentials
OneCLI.
Note:
**
For more information, see the “Startup” section in the LXPM documentation compatible with your
server at
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html.
Following are the available management options:
• Intel Optane PMem details
Select this option to view the following details concerning each of the the installed PMems:
– Firmware version
– Configuration status
– Raw capacity
– Memory capacity
– App Direct capacity
– Unconfigured capacity
– Inaccessible capacity
– Reserved capacity
– Percentage remaining
– Security state
Alternatively, view PMem details with the following command in OneCLI:
onecli.exe config show IntelOptanePMEM
--imm USERID:PASSW0RD@10.104.195.86
Notes:
– USERID stands for XCC user ID.
– PASSW0RD stands for XCC user password.
– 10.104.195.86 stands for IP address.
• Goals
– Memory Mode [%]
Select this option to define the percentage of PMem capacity that is invested in system memory, and
hence decide the PMem mode:
140
ThinkSystem SR860 Setup Guide