Table 34. Memory module locations on each compute system board (continued)
DIMM number
Compute system
board 1 (lower
board, lower tray)
DIMM number
Compute system
board 2 (upper
board, lower tray)
DIMM number
Compute system
board 3 (lower
board, upper tray)
DIMM number
Compute system
board 4 (upper
board, upper tray)
DIMM number
14
14 38 62 86
15
15 39 63 87
16
16 40 64 88
17
17 41 65 89
18
18 42 66 90
19
19 43 67 91
20
20 44 68 92
21
21 45 69 93
22
22 46 70 94
23
23 47 71 95
24
24 48 72 96
Complete the following steps to install a memory module:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DbSYJFY74PoKmph7vgrkKH&playnext=1
• Youku: http://list.youku.com/albumlist/show/id_50952215
Attention: Memory modules are sensitive to static discharge and require special handling. In addition to the
standard guidelines for Handling static-sensitive devices:
• Always wear an electrostatic-discharge strap when removing or installing memory modules. Electrostatic-
discharge gloves can also be used.
• Never hold two or more memory modules together so that they touch. Do not stack memory modules
directly on top of each other during storage.
• Never touch the gold memory module connector contacts or allow these contacts to touch the outside of
the memory-module connector housing.
• Handle memory modules with care: never bend, twist, or drop a memory module.
Step 1. Install the memory module.
168
ThinkSystem SR950 Setup Guide
To Next Page
Loading...
