Step 1. Align the four tips on the rear system fan with the corresponding slots in the mounting area.
Figure 56. Positioning the rear system fan into the chassis
Step 2. Slide the rear system fan until it snaps into place. Ensure that all four tips on the fan are inserted
into the corresponding slots as demonstrated.
Figure 57. Installing the rear system fan
Step 3. Connect the fan power cable to the Rear fan connector on the system board. See “System-board
components” on page 27 and “Fan power cable” on page 63.
After this task is completed
Chapter 4. Hardware replacement procedures 121
To Next Page
Loading...
