Eight 3.5-inch simple-swap drives
Use this section to understand the cable routing for server models with eight 3.5-inch simple-swap drives
(software RAID).
Following are the options available for this configuration:
• “Eight SATA drives” on page 71
• “Seven SATA drives and one NVMe drive” on page 72
Eight SATA drives
From To From To
1
Lower backplate
Backplane 1 power
connector
1
Upper backplate
Backplane 2 power
connector
2
SATA 0-3
2
SATA 4, 5, 6, 7
Chapter 3. Internal cable routing 71
To Next Page
Loading...
