Server models with eight 2.5-inch hot-swap drives
Use this section to understand the cable routing for server models with eight 2.5-inch hot-swap drives.
Server model: eight 2.5-inch SAS/SATA drives, one 8i RAID adapter
Notes:
• Ensure that all cables are routed through the correct cable clips.
• Broken lines indicate the hidden parts.
Figure 21. Cable routing for server models with eight 2.5-inch SAS/SATA drives and one 8i RAID adapter
Cable
From To
1 SAS signal cable SAS 0 and SAS 1 connectors on the
backplane
C0 and C1 connectors on the 8i RAID adapter
2 Power cable Power connector on the backplane Backplane 1 power connector on the system
board
Chapter 2. Server components 39
To Next Page
Loading...
