Server models with eight 3.5-inch hot-swap drives and four 2.5-inch hot-swap drives
Use this section to understand the cable routing for server models with eight 3.5-inch hot-swap SAS/SATA
drives and four 2.5-inch hot-swap SAS/SATA drives.
Server model: eight 3.5-inch hot-swap SAS/SATA drives, four 2.5-inch hot-swap SAS/SATA drives,
two 8i RAID adapters
Notes:
• Ensure that all cables are routed through the correct cable clips.
• Broken lines indicate the hidden parts.
Figure 30. Cable routing for server models with eight 3.5-inch hot-swap SAS/SATA drives, four 2.5-inch hot-swap SAS/
SATA drives, and two 8i RAID adapters
50 ThinkSystem ST550 Maintenance Manual
To Next Page
Loading...
