User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFPU4056M: TPM card is changed, need install back the original TPM card which shipped with
the system.
Severity: Error
User Action:
Complete the following steps:
1. Re-install the original TPM card that shipped with the system.
2. Reboot the system.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU4057I: Secure boot variable is being accessed with an unauthorized password, reset the
system immediately to recover.
Severity: Warning
User Action:
Information only; no action is required.
• FQXSFPU4058I: Secure Boot Setting is changed from enabled to disabled
Severity: Warning
User Action:
Information only; no action is required.
• FQXSFPU4059I: User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI
accepted the request and will execute priot to OS boot.
Severity: Info
User Action:
Complete the following steps:
1. Change SystemOobCustom.SkipAhciFreezeLock from Disable to Enable using OneCLI tool.
2. Reboot the system into OS.
• FQXSFPU4060I: Skipped freezing lock of AHCI-attached SATA drives.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4061I: Restored default locking behavior of AHCI-attached SATA drives.
Severity: Info
User Action:
Information only; no action is required.
Chapter 3. UEFI events 171
To Next Page
Loading...
