Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPSD0005I Hot Spare enabled for drive [arg1] in the enclosure/chassis (MTM-SN:
[arg2]).
Informational
FQXSPSD0007I Rebuild in progress for Array in system
[ComputerSystemElementName].
Informational
FQXSPSD0008I Array rebuild in progress on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSD2000I The [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName].
Informational
FQXSPSD2001I The [StorageVolumeElementName] has been enabled. Informational
FQXSPSD2002I Failure no longer Predicted on [StorageVolumeElementName] for
array [ComputerSystemElementName].
Informational
FQXSPSD2003I Hot spare disabled for [ComputerSystemElementName]. Informational
FQXSPSD2005I Critical Array [ComputerSystemElementName] has deasserted. Informational
FQXSPSD2006I Array in system [ComputerSystemElementName] has been restored. Informational
FQXSPSD2007I Rebuild completed for Array in system
[ComputerSystemElementName].
Informational
FQXSPSD2008I Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been
enabled.
Informational
FQXSPSD2010I Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been
removed.
Informational
FQXSPSD2011I Failure no longer Predicted on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSD2012I Hot Spare disabled for drive [arg1] in the enclosure/chassis (MTM-SN:
[arg2]).
Informational
FQXSPSD2013I Array critical deasserted on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSD2014I Array restored on drive [arg1] in the enclosure/chassis (MTM-S/N:
[arg2]).
Informational
FQXSPSD2015I Array rebuild completed on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSE2000I The Chassis [PhysicalPackageElementName] was closed. Informational
FQXSPSE4001I Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at
IP address [arg4].
Informational
FQXSPSE4002I Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB
client at IP address [arg4].
Informational
FQXSPSE4003I Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]. Informational
FQXSPSE4004I Remote access attempt failed. Invalid userid or password received.
Userid is [arg1] from WEB browser at IP address [arg2].
Informational
FQXSPSE4005I Remote access attempt failed. Invalid userid or password received.
Userid is [arg1] from TELNET client at IP address [arg2].
Informational
Chapter 2. XClarity Controller events 17
To Next Page
Loading...
