Need help?Do you have a question about the Lentek Bite Shield and is the answer not in the manual?
Guide for removing the compartment cover, inserting two "AA" batteries, and replacing the cover.
Information regarding the use of a 3 Volts DC, 100mA AC adapter with a positive tip.
Instructions to remove the cartridge from its package and align it with the unit for installation.
Details on sliding the repellent cartridge to the right, aligning the "LOCK" arrow, with the unit facing forward.
Guidance on placing or hanging the Bite Shield for maximum effectiveness, e.g., on a table or wall.
Instructions on how to slide the power switch to the ON position to start the device.
Confirmation that the Bite Shield begins working immediately after being turned on.
Recommendation to store the unit in a sealable plastic bag to prolong cartridge life.
Information on contacting local retailers or calling 888-3-LENTEK for replacement cartridges.
To Next Page
General