Lenze 8400 BaseLine C - Ls_Disfree_A

Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05 323
11 Function library
11.9 LS_DisFree_a
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.9 LS_DisFree_a
This system block displays any four analog signals of the application on display codes. The signals
to be displayed are selected via the given configuration parameters.
Inputs
Parameter
Identifier
Data type
Information/possible settings
nDis1_a ... nDis4_a
INT
Inputs for any analog signal of the application
Parameter Possible settings Info
C482/1...4
-199.9 % 199.9 % Display of the analog signals which
are applied at the nDis1_a ... nDis4_a
inputs.
C620/9...12
See selection list - analog signals Configuration parameters for the in-
puts nDis1_a ... nDis4_a
Q'LVBD
Q'LVBD
Q'LVBD
Q'LVBD
&
&
&
&
/6B'LV)UHHBD
&
&
&RQILJXUDWLRQSDUDPHWHUV
&
&