Lenze 8400 motec - Port Interconnection of Process Data Objects (PDO)

Process data transfer
Port interconnection of process data objects (PDO)
40
Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 4.0 - 09/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2 Port interconnection of process data objects (PDO)
 How to configure the port interconnection in the »Engineer«:
1. Go to the Application parameters tab to make the default setting of the I/O configuration.
Select the "Network (ASi)" control mode (C00007).
2. The Process data objects tab of the AS-i interface displays the preset I/O configuration.