Lenze 8400 - 3 Product Description; Application as Directed; Identification

E84AYCER communication manual (PROFINET)
Product description
Application as directed
14 L EDS84AYCER EN 2.0 - 11/2010
3 Product description
3.1 Application as directed
The communication module ...
 is an accessory module that can be used in conjunction with the following standard
devices:
 is an item of equipment intended for use in industrial power systems.
 should only be used under the operating conditions prescribed in this documentation.
 should only be used in PROFINET networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and the hardware and software versions of the communication
module are indicated on the nameplate:
[3-1] Identification data
Product series Type designation From software version
Inverter Drives 8400 StateLine E84AVSCxxxxx 05.00
Inverter Drives 8400 HighLine E84AVHCxxxxx 05.00
Inverter Drives 8400 TopLine E84AVTCxxxxx 01.00
E84YCPM001E
1 Type designation (type)
E84 Product series
AVersion
Y Module identification: Extension module
C Module type: Communication module
ER PROFINET
V/S V: Coated design
S: Standard design
2 Hardware version (HW)
3 Software version (SW)
8400
Type:
Ser.No.:
HW: SW:
HW: SW: