Lenze 8600 series - High Resolution Data

-
-
I
12.3.9 High resolution data
Under Codes C380 to C382 you tan enter very precise setpoint and
act. value with a resolution of 14 bit plus sign.
Setpoint 1:
Setpoint scaled to the maximum frequency. The value of 214
corresponds to 100% of the maximum field frequency. The
inforrnation is identical with that under C046, with the differente
that you tan read the controller value directly thus excluding
conversion errors.
Total setpoint:
Total of main setpoint 1 and setpoint 2, each behind the ramp
generator, scaled to the maximum field frequency. The total
setpoint corresponds to the setpoint of the PI controller in closed-
loop control. The value of 214 corresponds to 100% of the
maximum field frequency.
Act. value of PI controller
Act. value for the Pl controller, scaled to the maximum field
frequency. The value of 214 corresponds to 100% of the maximum
field frequency. The information is identical with that under CO51,
with the differente that you tan read the controller value directly
thus excluding conversion errors.
Parameter Meanlng
- 16384 to +16384
Setpoint 1
-76384 to +16384
Total setpoint
-16384 to +16384 Act. value of PI controller
Acceptance
only display
only display
lmue
143