Lenze 8600 series - Description of the Analog Inputs and Outputs; Description of Further Inputs and Outputs

5.2.3 Description of the analog inputs and Outputs
Analog inputs
-~
-erminal Switch setting Use
(factory setting)
1 Setpoint 2
s, [-[Kl zrF j Setpoint 1, Master voltage
Voltage supply for
Potentiometer
LevellResolution
Parameter
setting see
-3ov...+3ov
12bit + sign
75, 68
i 2bit + sign
-12ov...+12ov 75.68
-1 OV/7mA
-
Analog Outputs (monitor Outputs)
Terminal Switch setting
Use
(factory setting)
iö-
Internal ground (GND)
62 Monitor 1 (Output
frequency)
Level
-1ov...+1ov
Parameter
setting see
Page
-
94
Monitor 1 (output
frequency)
-2OmA...+20mA 94
63 Monitor 2 (output current) -1ov...+1ov 94
Monitor 2
(output current)
-2OmA...+20mA 94
5.2.4 Description of further inputs and Outputs
Terminal
If a thermistomhermal contact is not used:
-
hze
31