Lenze 8600 series - Parameter Setting; Keypad; Key Functions; Plain Text Display

Parameter setting
1
Keypad
Plain text display
Keys
1.1
Key functions
Display of Status:
Fieady for Operation (LED green)
Imax-limit reached (LED red)
Pulse inhibit (LED yellow), released
by:
- Controller inhibit
- Fault indication (TRIP)
- Undervoltage/overvoltage
W
SH +
Function
PRG Change between code and Parameterlevel
PRG * Accept Change
A
Increase displayed number
SH+ A
Increase displayed number fast (scroll up)
r- I
Reduce displayed number
SH+ v
Reduce displayed number fast (scroll down)
STP Inhibit controller
SH + STP * Enable controller
* First press the SH key and then in addition the PRG or the STP key.
-
1.2 Plain text display
Position of the arrow+ marks the activated operating level
(code/parameter level)
1 Code 1 Parameter Unit
Ic 10 15 10 1 1 -3 1 1 1 0 1. 10 1 IH jz 1
0 Iu It Ip Iu It 1 If Ir Je Io Iu je In Ic ly
Example
Explaining text for each code and Parameter
Lenze 55