Lenze 9300 Series - 4 Installation of the standard device

Installing of the standard device
Contents
4

4−1
EDSVF9383V EN 7.1−04/2012
4 Installation of the standard device
Contents
4.1 Important notes 4.1−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Basic devices in the power range 110 ... 200 kW 4.2−1 . . . . . . . . . . . . . . . . . .
4.2.1 Dimensions 4.2−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2 Drilling the holes into the mounting plate 4.2−2 . . . . . . . . . . . . . . .
4.2.3 Fasten the mounting rails on the mounting plate 4.2−3 . . . . . . . .
4.2.4 Fasten controller on mounting plate 4.2−4 . . . . . . . . . . . . . . . . . . .
4.3 Basic devices in the power range 250 ... 400 kW 4.3−1 . . . . . . . . . . . . . . . . . .
4.3.1 Dimensions 4.3−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2 Drilling the holes into the mounting plate 4.3−2 . . . . . . . . . . . . . . .
4.3.3 Fasten the mounting rails on the mounting plate 4.3−3 . . . . . . . .
4.3.4 Fasten controller on mounting plate 4.3−4 . . . . . . . . . . . . . . . . . . .