Lenze 9300 Series - 4.2.3 Fasten the mounting rails on the mounting plate

Installing of the standard device
Basic devices in the power range 110 ... 200 kW
Fasten the mounting rails on the mounting plate
4
4.2
4.2.3

4.2−3
EDSVF9383V EN 7.1−04/2012
4.2.3 Fasten the mounting rails on the mounting plate

1
0
0
2
3
3
2
93vec071
Fig. 4.2−3 Fastening the mounting rails on the mounting plate
 Mounting rail
 Mounting plate
 Hexagon socket screw M8 × 25 mm
 Spring washer M8
1. Hold the mounting rails behind the mounting plate.
2. Fasten the mounting rails exactly at the illustrated points using 2
hexagon socket screws and spring washers on each side.