Lenze 9300 Series - 5.4 Basic devices in the power range 110... 200 kW; 5.4.1 Wiring according to EMC (CE-typical drive system)

Basic devices in the power range 110 ... 200 kW
Wiring according to EMC (CE−typical drive system)
5.4
5.4.1

5.4−1
EDSVF9383V EN 7.1−04/2012
5.4 Basic devices in the power range 110 ... 200 kW
5.4.1 Wiring according to EMC (CE−typical drive system)
The drives comply with the EC Directive on "Electromagnetic Compatibility"
if they are installed in accordance with the specifications for the CE−typical
drive system. The user is responsible for the compliance of the machine
application with the EC Directive.
 Note!
Observe the notes given in the chapter "Basics for wiring
according to EMC"!