Technical data
General data and operating conditions
4
l
44
EDKRBG018R DE/EN/FR/ES/IT 7.0
Mounting conditions
Mounting location
l The mounting location must comply with the
device features mentioned in the chapter "General
data".
l Flammable materials or substances may not be
placed in the vicinity of the brake resistor.
l The heat generated by the brake resistor must be
dissipated freely.
Mounting position
Standard Horizontally standing
Variant Vertically suspended with connections at the bottom.
Free spaces
Standard Top > 200 mm
To the sides > 100 mm
Variant Top > 200 mm
To the sides > 100 mm
Bottom > 300 mm
To Next Page
Loading...
