Lenze ERBG Series - 5 Mechanical Installation; Mounting Steps

Mechanical installation
Mounting steps
5
l
48
EDKRBG018R DE/EN/FR/ES/IT 7.0
5 Mechanical installation
5.1 Mounting steps
How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the operating conditions
mentioned in the technical data; if required, additional measures must
be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must ensure the
permanent mechanical connection.