Lenze g500-B - Technical Data; Notes Regarding the Given Data

Technical data
Not
es regarding the given data
Catalog data
The power, torque, and speed values specied in the conguraon are rounded values and
apply for
•
Oper
ang me per day = 8 hrs (100 % ED)
•
Duty class up to 10 switching operaons per hr
•
T
U
= 40 °C
•
Site altude ≤ 1000 m above sea level
•
The selecon tables indicate the mechanically permissible power levels and torques.
•
The rangs apply to the operang mode S1 (acc. to EN 60034).
NOTICE
In case of other oper
ang condions, the achievable values can dier for those menoned.
▶
In case of extreme operang condions, please contact your responsible Lenze sales
company.
Thermal power limit
The thermal power limit, de
ned by the heat balance, limits the permissible permanent
gearbox power. It is aected by:
•
the churning losses in the lubric
ant. These are determined by the mounng posion and
the circumferenal speed of the gears
•
the load and the speed
•
the ambient condions: temperature, air circulaon, input or dissipaon of heat via shas
and the foundaons.
NOTICE
A thermal check with the Drive Soluon Designer (DSD) c
ontacng the Lenze oce
responsible for you is required if
▶
the input speed n
1
> 1500 rpm is exceeded in case of the gearbox raos given in the
following.
▶
The drive speeds given in the following are exceeded as a funcon of the mounng posion.
Temporarily up to 5 min, 30 % higher speeds are permissible.
Gearboxes Rao i
g500-B1500 ... B4300 ≤ 50
Motor Mounng posion A Mounng posion B
, E, F Mounng posion C, D
m850-S120 4000 r/min 3500 rpm 3000 r/min
m850-S140/S190 3000 r/min 2600 rpm 1500 r/min
Possible ways of extending the applic
aon area
•
Sha sealing ring made of FKM ma
terial/Viton (opon)
•
Reducing the lubricant amount (aer consultaon with Lenze)
•
Cooling the geared motor by means of air convecon on the machine/ system
Technical data
Not
es regarding the given data
39