Lenze g500-B - Page 13

Geared motors up to 450 Nm
Gearbox g500-B45 g500-B110 g500-B240 g500-B450
Min. motor assignment MSEMA□□
063-42 063-42 063-42 063-42
Max. motor assignment MSEMA□□
063-42 080-32 080-32 080-32
Technical data
Max. output torque Nm 45 110 240 450
Min. drive torque Nm 1.75 1.75 1.75 1.75
Max. drive torque Nm 1.75 5.0 5.0 5.0
Mounng posion
Standard M1, M2, M3, M4, M5, M6 (ABCDEF)
Combined M1-M6 (A-F) M1/5/6 (AEF)
Color Unpainted
Primed
Painted in RAL colors
Surface and corrosion protecon OKS-G
Dierent types of surface and corrosion protecon
Output sha
Solid sha with featherkey (V) mm 20 x 40 20 x 40 30 x 60 30 x 60
Hollow sha with keyway (H) mm 18/20 20/25 30/35 35/40
Hollow sha with shrink disc (S) mm 20 20 30/35 35
Sha material Steel
Stainless steel
Sha sealing ring material NBR
FKM (Viton)
Output sha bearing Standard
Reinforced
Gearbox design With foot (HBR)/(VBR/SBR)
With foot and centring (HAR/VAR/SAR)
With foot and output ange (HAK/VAK/SAK)
Output ange (K) mm 110/120 120/160 160/200 200
Lubricant Mineral oil
Synthec oil
Food-compable oil
Cooling Self-venlated
Torque plate At threaded pitch circle
On the housing foot
Rubber buers
Sha cover Hollow sha cover, hoseproof
Shrink disc cover
Motor connecon
Power connecon Terminal box
QUICKON V2 connector
M15 connector
Control terminal M12 connector
Spring-applied brake
Type Without
Standard
LongLife
Without/with manual release lever
Brake resistor Without
Integrated
External
Feedback Without
Temperature monitoring Internal
Product informaon
The modular system
13