Lenze I/O system 1000 - Page 153

5 CANopen communication
5.11 Parameterising the encoder evaluation
153
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
I-3107/x Bit length of encoder
data
Enter the bit length of the encoder data here. Depending on
the encoder, the encoder data consist of the current encoder
value with subsequent bits. The total length has to be
specified here. More information on this can be found in the
data sheet for your encoder.
7 (0x07) = "8 bits"
8 (0x08) = "9 bits"
9 (0x09) = "10 bits"
10 (0x0A) = "11 bits"
11 (0x0B) = "12 bits"
12 (0x0C) = "13 bits"
13 (0x0D) = "14 bits"
14 0x0E) = "15 bits"
15 (0x0F) = "16 bits"
16 (0x10) = "17 bits"
17 (0x11) = "18 bits"
18 (0x12) = "19 bits"
19 (0x13) = "20 bits"
20 (0x14) = "21 bits"
21 (0x15) = "22 bits"
22 (0x16) = "23 bits"
23 (0x17) = "24 bits"
24 (0x18) = "25 bits"
25 (0x19) = "26 bits"
26 (0x1A) = "27 bits"
27 (0x1B) = "28 bits"
28 (0x1C) = "29 bits"
29 (0x1D) = "30 bits"
30 (0x1E) = "31 bits"
31 (0x1F) = "32 bits"
0x18
Index/subindex Name Description/value Lenze