Lenze I/O system 1000 - Page 289

6 PROFIBUS communication
6.8 Parameterising the encoder evaluation
289
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6 Reserved
7 SSI function By enabling the SSI function the module starts with the cycle
output and the evaluation of the encoder data. In the
"monitor operation" mode, the module starts with the
encoder evaluation.
0 (0x00) = inhibited
1 (0x01) = enabled
0x00
Data set Name Description/value Lenze
No. Byte