Lenze I/O system 1000 - Page 542

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 542
9 PROFINET communication
9.9 Parameterising the encoder evaluation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Data set Name Description/value Lenze
No. Byte
0x80 6 Reserved
7 SSI function By enabling the SSI function the module starts with the
cycle output and the evaluation of the encoder data. In the
"monitor operation" mode, the module starts with the
encoder evaluation.
0 (0x00) = inhibited
1 (0x01) = enabled
0x00