Lenze i410 - Page 70

Address Name / seng range / [default seng] Informaon
0x4022:001
(P451.01)
PID setpoint presets: Preset 1
(PID pr
esets: PID preset 1)
-300.00 ... [0.00] ... 300.00 PID unit
Parameterisable process controller setpoints (presets) for PID control.
0x4022:002
(P451.02)
PID setpoint presets: Preset 2
(PID presets: PID preset 2)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:003
(P451.03)
PID setpoint presets: Preset 3
(PID pr
esets: PID preset 3)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:004
(P451.04)
PID setpoint presets: Preset 4
(PID pr
esets: PID preset 4)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:005
(P451.05)
PID setpoint presets: Preset 5
(PID presets: PID preset 5)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:006
(P451.06)
PID setpoint presets: Preset 6
(PID presets: PID preset 6)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:007
(P451.07)
PID setpoint presets: Preset 7
(PID presets: PID preset 7)
-300.00 ... [0.00] ... 300.00 PID unit
0x4022:008
(P451.08)
PID setpoint presets: Preset 8
(PID presets: PID preset 8)
-300.00 ... [0.00] ... 300.00 PID unit
A switch-over to a preset during operaon is also possible as an alternave to the standard
se
tpoint source seng.
4Example: Change-over from keypad setpoint to preset 1 ... 7 ^ 118
Conguring the frequency control
Congure setpoint sources
Se
tpoint presets
70