Lenze i550 Series - Page 131

Motor connecon
Inverter i550-C45/400-3 i550-C55/400-3 i550-C75/400-3 i550-C90/400-3
Connecon X105
Connecon type Screw terminal
Max. cable cross-secon mm² 50 95 95 150
Max. cable cross-secon AWG 1/0 4/0 4/0 2 x 2/0
Stripping length mm 19 22 22 28
Stripping length inch 0.75 0.87 0.87 1.1
Tightening torque Nm 4 10 10 18
Tightening torque lb-in 35 89 89 160
Required tool Hexagon socket 5 Hexagon socket 6 Hexagon socket 8
Motor connecon
Inverter i550-C110/400-3
Connecon X105
Connecon type Screw terminal
Max. cable cross-secon mm² 150
Max. cable cross-secon AWG 2 x 2/0
Stripping length mm 28
Stripping length inch 1.1
Tightening torque Nm 18
Tightening torque lb-in 160
Required tool Hexagon socket 8
The terminal data for the terminal X1 can be found under:4Terminal data ^ 72
Technical data
3-phase mains connecon 400 V
Terminal data
131