Lenze i950 - Page 480

Address Designaon Default seng Data type Factor A M
0x2C61:001 Pole
posion idencaon (360°) sengs: Current
amplitude
100 % U16 1 C
0x2C61:002 Pole posion idencaon (360°) sengs: Ramp
me
40 s U16 1 C
0x2C61:003 Pole posion idencaon (360°) sengs: Direcon
of rotaon
CW [0] U8 C
0x2C61:004 Pole posion idencaon (360°) sengs: Error tol-
erance
20 ° U8 1 -
0x2C61:005 Pole posion idencaon (360°) sengs: Absolute
current amplitude
x.xx A (Read only) U32 100 X
0x2C62:001 Pole posion idencaon (min. movement) set-
tings: Current amplitude
25 % U16 1 C
0x2C62:002 Pole posion idencaon (min. movement) set-
tings: Ramp me
10 s U16 1 C
0x2C62:003 Pole posion idencaon (min. movement) set-
tings: Gain
0 % U16 1 -
0x2C62:004 Pole posion idencaon (min. movement) set-
tings: Reset me
62.5 ms U16 10 -
0x2C62:005 Pole posion idencaon (min. movement) set-
tings: Max. move permied
20 ° U8 1 -
0x2C62:006 Pole posion idencaon (min. movement) set-
tings: Absolute current amplitude
x.xx A (Read only) U32 100 X
0x2C63:001 PPI without movement: Execuon Deacvated [0] U8 C
0x2D00:001 Touch probe (TP) delay me: Touch probe 1 delay
me
0.000 ms U16 1000 -
0x2D00:002 Touch probe (TP) delay me: Touch probe 2 delay
me
0.000 ms U16 1000 -
0x2D00:003 Touch probe (TP) delay me: Touch probe 3 delay
me
0.000 ms U16 1000 -
0x2D00:004 Touch probe (TP) delay me: Touch probe 4 delay
me
0.000 ms U16 1000 -
0x2D01:001 Touch probe (TP) me stamp: Touch probe 1-rising
edg
e me stamp
x ns (Read only) U32 1 X ●
0x2D01:002 Touch probe (TP) me stamp: Touch probe 1-falling
edge me stamp
x ns (Read only) U32 1 X ●
0x2D01:003 Touch probe (TP) me stamp: Touch probe 2-rising
edge me stamp
x ns (Read only) U32 1 X ●
0x2D01:004 Touch probe (TP) me stamp: Touch probe 2-falling
edge me stamp
x ns (Read only) U32 1 X ●
0x2D01:005 Touch probe (TP) me stamp: Touch probe 3-rising
edge me stamp
x ns (Read only) U32 1 X ●
0x2D01:006 Touch probe (TP) me stamp: Touch probe 3-falling
edg
e me stamp
x ns (Read only) U32 1 X ●
0x2D01:007 Touch probe (TP) me stamp: Touch probe 4-rising
edge me stamp
x ns (Read only) U32 1 X ●
0x2D01:008 Touch probe (TP) me stamp: Touch probe 4-falling
edge me stamp
x ns (Read only) U32 1 X ●
0x2D02:001 Touch probe diagnoscs: Touch probe 3/4 funcon 0x0000 U16 H ●
0x2D02:002 Touch probe diagnoscs: Touch-Probe 3/4 status - (Read only) U16 HX ●
0x2D03:001 Touch probe posion: Touch probe 3 posion rising
edge
x pos. unit (Read only) I32 1 X ●
0x2D03:002 Touch probe posion: Touch probe 3 posion falling
edge
x pos. unit (Read only) I32 1 X ●
0x2D03:003 Touch probe posion: Touch probe 4 posion rising
edge
x pos. unit (Read only) I32 1 X ●
0x2D03:004 Touch probe posion: Touch probe 4 posion falling
edge
x pos. unit (Read only) I32 1 X ●
0x2D40:001 Device ulisaon ixt: Power unit actual ulisaon x % (Read only) U16 1 X ●
0x2D40:002 Device
ulisaon ixt: Power unit warning threshold 95 % U16 1 -
* Default seng depending on the size.
Appendix
P
arameter aribute list
480